the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Actuator Control Using Reverse Polarity Latching Relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
ngoshe 
Member - Posts: 1
Member spacespace
Joined: August 25, 2020
Location: Zambia
Posted: August 25, 2020 at 9:33 AM / IP Logged Link to Post Post Reply Quote ngoshe
Trying to come up with a circuit to control a door actuator using a latching relay to open or close the door using a single momentary pulse trigger switch. Each time the trigger is pressed the door will move Forward or backwards. Next pulse will interrupt the signal and stop the motor. Another pulse will reverse the actuator. The ends are stopped by limit switches which in turn will reset the direction. All forward and reverse motions are done by reversing the motor polarity.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer