spacer spacer spacer spacer

Door Trigger Location

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 3
Member spacespace
Joined: September 09, 2020
Location: Trinidad and Tobago
Posted: September 09, 2020 at 5:58 AM / IP Logged Link to Post Post Reply Quote bessflick
Blessed day I am requesting information on the most commonly used procedure for wiring door triggers to alarms. I mostly use the door triggers of each door and diode isolate. However can another method be used to safely trigger all doors and in some cases the trunk? Some vehicle dosen't have door triggers and to trace all the wires are just cumbersome. Any assistance would be appreciated. Thanks
Copper - Posts: 300
Copper spacespace
Joined: November 21, 2003
Posted: September 09, 2020 at 9:35 AM / IP Logged Link to Post Post Reply Quote silvercivicsir
best bet would be to look and see if the trunk has a trunk light.. If it does, pull the bulb and look at the colors.. if there is no trunk light, zero chance it will have a trunk pin.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, January 20, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer