Viper 7941v P/X HD OLED Screen Replacement

Home / the12volt's Install Bay / Car Security and Convenience / Viper 7941v P/X HD OLED Screen Replacement

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: October 25, 2020 at 12:51 AM / IP Logged

As this viper 7941v replacement screen? thread topic is closed. I started this new one with the info i have found.

The LCD is soldered and needs to be de-soldered and new re-soldered into place.

The remote uses a 1.46" (1"x1" viewable) 128x128 pixel Solomon Systech SSD1351 with 37-pin Ribbon Connector

Communication protocol is a parallel interface.

Will be ordering a couple of them to fix one dim and one broken screen remote, will post my results when done.

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: October 10, 2022 at 10:00 AM / IP Logged

Ever take a stab at this...?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.