the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2015 Landrover Evoque


Post ReplyPost New Topic
< Prev Topic Next Topic >
bogucki 
Copper - Posts: 91
Copper spacespace
Joined: July 11, 2016
Location: Alberta, Canada
Posted: January 03, 2021 at 2:14 AM / IP Logged Link to Post Post Reply Quote bogucki
hey has anyone done a land rover evoque, i want to do one and have a few questions about it, i think i have it mostly figured out.
boguckialex
wirewise 
Moderator - Posts: 489
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 07, 2002
Location: California, United States
Posted: January 03, 2021 at 2:31 AM / IP Logged Link to Post Post Reply Quote wirewise
What are you wanting to install and what questions do you have about it?
~wirewise~ Verify all wiring with your meter before making any connections!
bogucki 
Copper - Posts: 91
Copper spacespace
Joined: July 11, 2016
Location: Alberta, Canada
Posted: January 03, 2021 at 10:49 AM / IP Logged Link to Post Post Reply Quote bogucki
hey, i want to install a compustar cm7200 with drone, i know this car is not supported but i know a few people have done it. i know the install will take place behind the glove box at the bcm. i know i will need the dei 1101t smart key box for the immo bypass, i know its 15/16 connections i will need to make as follows
12 volts in to power the cm7200
ignition IN only for ign sense for cm7200
PTS 1 (-)
PTS 2 (-)
lock (-)
unlock (-)
start1 (+) (brake pedal activate)
start2 (+) (start request)
4 park light wires diode isolated
brake shut down wire to under dash light to shut down car when door open
then the wires for the dei 1101T
ok now for my 2 questions
for the pts wires i wanted just to use the poc outputs from the cm7200, but some say i will need a relay with a good ground and a 250 ohm resisters on the wires to activate the pts wires, wanted to confirm this
and 2nd i see on pro demand this car has some sort of brake diag wire at the brake switch that goes open when pressing the pedal down. will i need to do this with a relay as well for the remote start to to work?
boguckialex

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer