the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Building A Power Supply


Post ReplyPost New Topic
< Prev Topic Next Topic >
bradfordam 
Member - Posts: 18
Member spacespace
Joined: April 07, 2011
Location: Nova Scotia, Canada
Posted: June 07, 2021 at 4:22 PM / IP Logged Link to Post Post Reply Quote bradfordam
PLAN: 120VAC > Transformer > 16ishVAC > *in electroboom voice* FULL BRIDGE RECTIFIER (150 amp) > 14ish V pulse DC > 3 Farad car audio cap > Battery bank.
QUESTION: capacitor choice/placement? because i'd be getting the top half of the wave at 120hz on the other side of the FULL BRIDGE RECTIFIER. i need a filter before i can charge a battery or hook up any equipment. so am i good to go or does anyone have any objections or better ideas...... ??
THANK YOU.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 13, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer