the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

451M Door Lock Relay Issues 1994 Ford Econoline


Post ReplyPost New Topic
< Prev Topic Next Topic >
snowytires 
Member - Posts: 2
Member spacespace
Joined: June†11, 2021
Posted: June†11, 2021 at 1:33 AM / IP Logged Link to Post Post Reply Quote snowytires
Iím installing an Avital 3100LX alarm and am trying to get the keyless entry working. My van has reverse polarity locks and Iím 80% sure I need a relay so I bought one and connected it to the passenger kick panel red and brown wires.
I currently have white and black wire connected to red lock wire leading to door.
Green wire connected to red lock wire leading to engine.
Brown wire connected to brown unlock wire leading to door.
Blue wire connected to brown unlock wire leading to engine.
Iíve tried purple wire grounded and to constant 12v and still doesnít work. The lock and unlock buttons on the door work, but the key fob does not. I hear the relay clicking but it doesnít affect the locks. Iím at such a loss. I tried even reversing the wires, white and brown leading to the engine and nothing.
What am I doing wrong?
snowytires 
Member - Posts: 2
Member spacespace
Joined: June†11, 2021
Posted: June†11, 2021 at 9:21 AM / IP Logged Link to Post Post Reply Quote snowytires
1994*** Econoline sorry!
mgoetz74 
Copper - Posts: 359
Copper spaceThis member consistently provides reliable informationspace
Joined: February†15, 2012
Location: United States
Posted: June†11, 2021 at 1:05 PM / IP Logged Link to Post Post Reply Quote mgoetz74
the 451m for five wire would be
white/black   brown lock wire going toward the switch
green/black   brown lock wire going away from the switch
brown/black red wire going towards the switch
blue/black   red wire going away from the switch
purple and the purple/black wire to a +12 constant
If it came with a factory key fob for keyless entry
purple and purple/black to +12 constant
white/black and brown/black not used
green/black - should be a pink/yellow and a pinky/green @ passenger switch, need to test but should show + when you hit lock or unlock, does not says which is which
blue/black - should be a pink/yellow and a pinky/green @ passenger switch, need to test but should show + when you hit lock or unlock, does not says which is which
31 years as a installer. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, September 24, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer