Add Flash for Already On Running Light

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Add Flash for Already On Running Light

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

erikhinzmn

Member - Posts: 1

Joined: June 15, 2021

Location: Minnesota, United States

Posted: June 15, 2021 at 6:58 AM / IP Logged

Hello,

I have a 2021 Polaris Rzr Turbo that has the front fang lights on it, that are setup to be constant amber running lights controlled by the ignition.

I have a turn signal kit that has 12v “+“ and “-“ wires coming out of it for left and right.

Is there a simple way to make my running lights flash using the turn signal ‘signal’ wire?

I’m sure it’s been answered before, I was just unable to find it.

Thank you!!

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 16, 2021 at 9:53 PM / IP Logged

On the output of the blinker kit, which wire is pulsed? The positive or the negative? Using a relay per side you will be able to make the fang light on that side go out when the blinker light is out and illuminate when the turn signal is on.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.