spacer spacer spacer spacer

2014 Ford Interceptor, Odd Ignition Issue

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: July 27, 2021
Location: Washington, United States
Posted: July 27, 2021 at 8:38 AM / IP Logged Link to Post Post Reply Quote 360mk2
I installed a camera system in a 2014 Ford interceptor sedan. System is powered directly from the battery with a 7.5 inline fuse. system also has an ignition sense wire that provides 12v when the ignition is turned on (1 amp fuse)
the system is designed to activate when the trigger wire gets a positive 12v (starts recording) in this case the system gets 12v from emergency lights.
the system starts like it should when the key is turned on. it does not record when the lights are activated..... if i remove the key then activate the lights the trigger works and the camera starts recording.
i have installed quite a few of these and haven't had this issue before. any ideas ?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, June 13, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer