Multiple Inputs and Outputs, Emergency Lighting

Home / the12volt's Install Bay / Relays / Multiple Inputs and Outputs, Emergency Lighting

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

covingtont

Member - Posts: 1

Joined: November 22, 2021

Location: South Carolina, United States

Posted: November 22, 2021 at 6:01 AM / IP Logged

Hello. This question is regarding emergency lighting.

I have a light that steady burns at 12v direct power, and a flasher module that makes them flash.

I am needing one input to bypass the flasher and steady burn the light. Another input would activate the flasher on the same LED.

I have tried diodes but did not like how warm they got.

We have vehicles that have the same setup and use three relays, but not sure of the wiring that was done to make this work without back feeding with different inputs.

Any help is much appreciated!

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 22, 2021 at 2:10 PM / IP Logged

Post a diagram of what you have with the diodes that are heating up.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.