2013 Chevrolet Tahoe, Compustar FT-CMX-HC, FT-ALARMIT-KIT, ADS-THR-GM10

Home / the12volt's Install Bay / Car Security and Convenience / 2013 Chevrolet Tahoe, Compustar FT-CMX-HC, FT-ALARMIT-KIT, ADS-THR-GM10

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jdmegcoupe

Copper - Posts: 80

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 15, 2003

Location: Massachusetts, United States

Posted: February 10, 2022 at 4:30 PM / IP Logged

Hello everyone, I have a Compustar FT-CMX-HC Startit, a FT-ALARM-KIT V2, a FT-KP2, and a ADS-THR-GM10 for my 2013 Chevrolet Tahoe. I am wondering if anyone can help me with what I need to wire, for the ads-thr-gm10 with CM-X-HC Startit kit, and the Alarmit kit. Do I need to wire in the wires front the CN4 20 Pin Harness and the relay for the starter wire that has the 2 yellow wires and one blue and one green, I know the siren from the alarmit kit goes to the brown wire on the cn4. So do I need to wires for the starter kill relay FT E-LOCK to the starter wires on the steering column? Do I need to wire all those wires, or does the blade and the T harness take care of it?  Thank you

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.