spacer spacer spacer spacer

Pairing Arc Amp With Speaker Setup

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: June 05, 2022
Location: New York, United States
Posted: June 05, 2022 at 10:29 AM / IP Logged Link to Post Post Reply Quote cusecorals
I have 2 pairs of hertz k170.
I want to add 2 arc a-10 subs at 2ohm or 1 a-10 at 4ohm.
I was looking at the Arc x2 850.5 but would I be able to use the Arc x2 1100.5 without overpowering the mids?
Been out of the audio hobby for a minute but on my way back in.
Member - Posts: 2
Member spacespace
Joined: May 26, 2022
Location: Washington, United States
Posted: June 07, 2022 at 6:34 AM / IP Logged Link to Post Post Reply Quote lineman26
As long as you are running just two channels of the 1100.5 to the Hertz K170 set you will be fine if you set the high pass filter and avoid distortion.
Car Audio shop manager - installer 1996 - 2005,

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Wednesday, July 24, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer