How To Wire Directed 415M To InstallGear Actuators?

Home / the12volt's Install Bay / Car Security and Convenience / How To Wire Directed 415M To InstallGear Actuators?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

evetts

Member - Posts: 6

Joined: May 22, 2022

Location: Delaware, United States

Posted: June 25, 2022 at 11:01 AM / IP Logged

Greetings all. Having some trouble trying to figure out how to wire this relay to the actuators. This is on an older ford truck without factory power locks. I installed an Avital 3100LX, and now I want to use the power lock feature in the alarm to add power locks to my truck. So I plugged the 3 wire connector from the relay into the alarm, and when I arm and disarm the alarm, the 451M clicks, so I think we’re good there. My question is, how do I wire this relay to the actuators? The actuators only have two wires each- a blue wire and a green wire. The relay has 5 wires coming out of it- the violet one obviously goes to constant 12v, but I can’t figure out the other wires- white, green, blue, brown (all with black stripe). I want to assume blue to blue and green to green and the others are unused? I would assume one would go to ground?

Yes the relay came with instructions but they suck, so any advice is greatly appreciate!

Back to Top

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: June 25, 2022 at 1:58 PM / IP Logged

white and brown to ground, blue and green to the blue and green of the actuator. purples to 12+

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Back to Top

evetts

Member - Posts: 6

Joined: May 22, 2022

Location: Delaware, United States

Posted: June 25, 2022 at 6:45 PM / IP Logged

Awesome, thank you so much!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.