spacer spacer spacer spacer

2006 Toyota Tacoma, Karr Alarm Uninstall, Door Locks

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: November 24, 2022
Posted: November 24, 2022 at 9:36 AM / IP Logged Link to Post Post Reply Quote shouseee
Recently purchased an 06 Tacoma that came with a Karr 4040A alarm system installed. Had a mind of its own and liked to go off sporadically, so today I ripped it out. Post-removal I noticed that the key fob remote unlock works as always, but the lock and panic buttons don't work.
I removed the control box, LED light, shock sensor and ignition relay. Reconnected the ground wirethat was interrupted by the relay. The truck starts no problem.
Can anyone clue me in on where to look to restore the door lock and panic functions? Broken wire at one of the wire tap points maybe? Or could I have missed some other piece of the puzzle when removing the alarm? Thanks in advance for any help.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, July 12, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer