spacer spacer spacer spacer

Guard Dawg Keyless Ignition Install

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: March 28, 2023
Location: New Zealand
Posted: March 28, 2023 at 2:18 AM / IP Logged Link to Post Post Reply Quote hideehole
Hi just starting to think about wiring harness for my bike. I will be using the Guard Dawg keyless system. Trouble is the manual and all the web sites go on about the plug and play version. But I have the KIM-U universal kit (exactly the same but without extra bit of wiring)and the three pin connector block has three wires:- grey, black and black/white. Everything I have seen shows only two wires for this connector. Does anyone know what this thin black wire is meant to connect to?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, July 19, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer