the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Micro Keyless Entry Switch Configuration


Post ReplyPost New Topic
< Prev Topic Next Topic >
vicfreg 
Member - Posts: 2
Member spacespace
Joined: May 20, 2023
Location: North Carolina, United States
Posted: May 20, 2023 at 7:30 AM / IP Logged Link to Post Post Reply Quote vicfreg
I have a Micro keyless entry system (DLR4V) I am going to install in my car. I have 2 wire actuators on each door. I have the system on my bench, wired up, and it works properly with the remote controls. I also want to wire in 2 momentary push buttons that are on my console, one for the lock, and one for the unlock. The switches are SPDT. The keyless entry system is designed to be used with a 6 pin momentary rocker switch. I want to use the 2 pushbuttons instead of the 6 pin switch. I can't figure out how to wire the 2 switches to the keyless entry to make it work with these switches.
Here is the link to the wiring diagram.
https://manualzz.com/doc/6413966/keyless-entry-dlr4v
The White/Black and the Brown/Black are the wires I need to interface with my 2 SPDT momentary pushbuttons.
Any help would be appreciated!
Vic
Mustang Vic
cpalmer 
Copper - Posts: 111
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: May 21, 2023 at 11:41 AM / IP Logged Link to Post Post Reply Quote cpalmer
Doesn't look like it would work that way. The relays that you would need to trigger with your console switches are built on to the board of the Micro keyless. I think it would be better to get a dedicated Lock/Unlock switch and wire it in properly.
vicfreg 
Member - Posts: 2
Member spacespace
Joined: May 20, 2023
Location: North Carolina, United States
Posted: May 23, 2023 at 6:17 AM / IP Logged Link to Post Post Reply Quote vicfreg
Yes, you are right. I need a reversing polarity set up, which I cannot do with the existing switches I have. Thanks for the help!
Mustang Vic

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer