Turn Signal Output To Steady Output To Trigger RV Camera

Home / the12volt's Install Bay / Relays / Turn Signal Output To Steady Output To Trigger RV Camera

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

steveuk

Member - Posts: 2

Joined: January 02, 2025

Location: United Kingdom

Posted: January 03, 2025 at 4:49 AM / IP Logged

Hello from the UK. Happy New Year to all.

I am looking for solution to allow a turn signal to act as a trigger for a RV (Caravan) Camera system, when activated, will switch to that camera. The camera has an input for this signal. I believe Relay 59 will provide for this. I am new to electronics, though understand the logic of the circuit. Just a little confused on the parts needed to make this up. Can anyone help list the recommended parts, from the relay (with diode built in), to Capacitor, diode and resistor. Many thanks Steve

Steve UK

Back to Top

i am an idiot

Platinum - Posts: 13,705

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: January 03, 2025 at 7:08 PM / IP Logged

Parts list for diagram #59

The 2 diodes are 1n400x x = any number between and including 1 and 7

The resistor is 10,000 or 10K ohms.

The capacitor is 10,000 microfarad in a voltage of at least 25 volts.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Back to Top

steveuk

Member - Posts: 2

Joined: January 02, 2025

Location: United Kingdom

Posted: January 10, 2025 at 7:27 AM / IP Logged

Thank you

Steve UK

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.