the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2016 Toyota Camry, Remote Start Error


Post ReplyPost New Topic
< Prev Topic Next Topic >
baby007 
Member - Posts: 30
Member spacespace
Joined: February 20, 2009
Location: California, United States
Posted: March 10, 2025 at 12:02 AM / IP Logged Link to Post Post Reply Quote baby007
Hi, I'm installing with Compustar CMX,T13 remote, and Blade module. All lock, unlock, alarm functions are working fine. Every time I remote start, the light on the Blade flash blue one, and solid red for 1 - 2s then turn off. Dashboard and odometer light turn on but car wouldn't start. It then turn everything off, try to start again, dashboard and odo are on again. It keeps doing that for I think 3 times then gives up.
Does that mean I have an "Incorrect Programming" error? (according to idatalink)
lee.lopez 
Copper - Posts: 247
Copper spacespace
Joined: September 02, 2024
Location: Texas, United States
Posted: March 10, 2025 at 5:22 AM / IP Logged Link to Post Post Reply Quote lee.lopez
Your 2 way remote will give you a start error code.
A solid red on the Blade LED is "waiting for more vehicle information". You might try a factory reset and then reprogramming if that doesn't work.
baby007 
Member - Posts: 30
Member spacespace
Joined: February 20, 2009
Location: California, United States
Posted: March 30, 2025 at 12:20 PM / IP Logged Link to Post Post Reply Quote baby007
There was no error shown on the remote. I swap out the brain and everything working now.
One more thing is how would you set the runtime on the OP500 to something like 10 minutes?
I believed we need an updated OP500 but not sure how to check if mine is already up to date?
Manual saying you need to select option 4 for Group 2-7 (for runtime 3-45 min). After choosing option 4, how do you specify the exact runtime?
Thank you
lee.lopez 
Copper - Posts: 247
Copper spacespace
Joined: September 02, 2024
Location: Texas, United States
Posted: March 30, 2025 at 4:51 PM / IP Logged Link to Post Post Reply Quote lee.lopez
Keep scrolling and you will see after menu 4. It'll be in special features. Same thing if you choose to change defrost temperature.
baby007 
Member - Posts: 30
Member spacespace
Joined: February 20, 2009
Location: California, United States
Posted: April 16, 2025 at 9:38 PM / IP Logged Link to Post Post Reply Quote baby007
Found it.
Thanks alot
One more question, when wiring table says "Left Front Window (Up/Down) (motor is part of module)", does that mean one touch window module not compatible?
lee.lopez 
Copper - Posts: 247
Copper spacespace
Joined: September 02, 2024
Location: Texas, United States
Posted: April 17, 2025 at 4:44 PM / IP Logged Link to Post Post Reply Quote lee.lopez
I've never messed with one of those window modules, so I couldn't tell you.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 30, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer