Mazda CX90, IDatastart CMHCXAO Remote Start With RF Kit

Home / the12volt's Install Bay / Car Security and Convenience / Mazda CX90, IDatastart CMHCXAO Remote Start With RF Kit

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dts828

Member - Posts: 7

Joined: March 26, 2016

Location: Georgia, United States

Posted: March 10, 2025 at 7:06 PM / IP Logged

Installed IDatastart CMHCXAO RS with rf kit since you cant use OEM fobs for RS. RS works fine with rf kit and disarms factory alarm and remote starts as expected. I noticed if you use the fr kit remotes to unlock car(not after remote start) it unlocks car but sets off factory alarm. Is this normal? Is the rf kit remotes strictly for remote starting? When unlocking the car using carlink it also sets off the factory alarm. Is this a firmware or programming issue?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.