Older Compustar Remote Start, Unknown Fob Type/Number

So unfortunately I'm back, I got the new antenna and followed the programming procedure and here's what happens, I cycle the key 5 times, I get the parking lights flash, I press the lock button on the remotes, one flash, then 2 flashes for leaving programming mode, but when I press any of the buttons they *sometimes* work, but VERY rarely, and I haven't gotten the start button to work at all, I'll try getting new batteries but I doubt it's the issue. I've done the tach learn as well, start the car, let it idle, hold brake and press tach button, I get one flash, so I think that's good. Also I don't see any blue LED's on the antenna, and the red/green light doesn't really light up when I press any of the buttons, I'm really hoping it's not something broken :( there's also a jumper for ign, acc, and sta but I'm not sure what the jumper is actually for. but please let me know if you have any other troubleshooting suggestions, thanks in advance! Edit: Small update, when I press the button on the antenna it shows a red light, and while it's on after pressing it, when I press the lock button on either remote it lights up green for a second then goes back to red, but it only turns green for the lock button, the unlock and start buttons don't make it change. Don't know if this is helpful or not. But thought I'd give as many details as possible.