Floor Mount DVD

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Floor Mount DVD (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DjIQ

Copper - Posts: 107

Joined: March 10, 2003

Location: United States

Posted: June 16, 2003 at 11:02 AM / IP Logged

Whats the best method for mounting accessories in the floor? what kind of screws to use? should i jack up the car and bolt the screws underneath?

Powerslave0

Copper - Posts: 116

Joined: November 12, 2002

Location: United States

Posted: June 18, 2003 at 1:29 PM / IP Logged

Floor bolting is ok, just be prepared for skips and all that when you hit bumps.

Usually, just drill the holes through the floor, and use METAL screws. I mount CD changers this way, I mounted an AMP and CD changer on my rear seats in the trunk, just drilled through the metal, and screwed them in, no problems.

I had a GEO TRACKER, I just pulled the seat out, mounted the changer, drilled the holes though at the brackets, screwed it down, put the seat back in. . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Floor Mount DVD

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.