Bazooka amp tube wire diagram

I have a used amplified Bazooka bass tube that has the rca's cut off of them. I'd like to rewire the rca's and use this tube in my girls ride but I need to know what's what? Here is a break down of what I have on this 10 pin plug. wire is not even in the plug so Axe that. 2 blk (look like speaker wires but no stripe) Orange green grey then white /blue stripe 2 white's (going to same pin then a 2nd white w/ blue stripe I'm guessing the 2 whites are a common ground for the RCA's but I'm still not sure what color the remote wire is. I also have a red & blk wire but I know what those are and they aren't on the plug they go directly into the tube. thanks ant

Looks like you have the A-40 series. Hookup looks like this: Both Blacks: High level outputs (+,-) Orange: Remote turn-on Green: High level input (left channel) Gray: High level input (right channel) Both Whites: Low level inputs (+) [RCA] Both Whites w/blue strips: Low level inputs (-) [RCA] Hope this helps! Take care, Eric