the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

keyless locks

Home / the12volt's Install Bay / Car Security and Convenience / keyless locks (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
chuck_tempe 
Copper - Posts: 58
Copper spacespace
Joined: June 21, 2003
Location: Arizona, United States
Posted: June 23, 2003 at 10:30 PM / IP Logged  

judging from the link you've posted, if everything is hooked up to the module, you locks and remotes should work properly.

double check you wiring.

without the actual diagram, i'm just guessing on what's wrong.

scelsi14 
Member - Posts: 26
Member spacespace
Joined: July 14, 2002
Location: United States
Posted: June 25, 2003 at 7:57 AM / IP Logged  
Ok, when I did what Velocity Motors said, I had a 12V until i pushed the button, then it went back to 0. What does this tell me? Except when I push the lock button with the lead on the black wire it only goes down to 10 volts, but lock is the one that is working for me. Do I need the unlock wire to stay that hot?
scelsi14 
Member - Posts: 26
Member spacespace
Joined: July 14, 2002
Location: United States
Posted: June 25, 2003 at 7:59 AM / IP Logged  
That was the unlock wire and unlock button that went back to 0. Sorry about that
scelsi14 
Member - Posts: 26
Member spacespace
Joined: July 14, 2002
Location: United States
Posted: June 25, 2003 at 8:08 AM / IP Logged  
What diagram would be beneficial chuck? Like what the wires on the module are connected to?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 25, 2003 at 9:14 AM / IP Logged  
Seeing that your KE unit sends out a (-) pulse for trigger, then it's working properly for the unlock . The LOCK on the other hand has to also go to 0 volts in order for it to work properly. Ther eis the problem. The output on the LOCK wire is not grounding like it's supposed to. Chances are the KE unit's lock output is defective.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
scelsi14 
Member - Posts: 26
Member spacespace
Joined: July 14, 2002
Location: United States
Posted: June 25, 2003 at 10:01 AM / IP Logged  
Is there any way that I can fix that? Or possibly do something to bypass the faulty ground?
scelsi14 
Member - Posts: 26
Member spacespace
Joined: July 14, 2002
Location: United States
Posted: June 29, 2003 at 8:08 AM / IP Logged  
What would I be looking for on the module itself?Can i use relays to get around the bad ground?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 29, 2003 at 8:21 AM / IP Logged  
If the lock output does not drop down to 0 volts ( only 10 volts ), there really is no way around it. Just take the KE unit back for warranty to the place you got it from ( if possible ).
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer