Amp install

Home / the12volt's Install Bay / Car Audio / Amp install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drudy1

Member - Posts: 1

Joined: June 26, 2003

Location: Canada

Posted: June 26, 2003 at 9:02 PM / IP Logged

I would like to install a fosgate amp under the passenger seat of my 92 stealth but I am worried about clearance height. Could I raise the seat by adding a washer or two under the mounting bolts?

Thanks.

drudy1

ViperFreak_01

Member - Posts: 14

Joined: June 25, 2003

Posted: June 27, 2003 at 9:26 AM / IP Logged

I am not sure what the setup on the seats of a Stealth are, but if you are going to be raising the height of your seats, you may need to buy longer bolts...Just be sure you have a bolt that threads in completely...the danger would be not mounting the seat correctly...Not a pretty picture in a car wreck when the seats fly out...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.