530T problem

I am having problems installing a 530T with a Viper 790XV. The car is a 1999 Lincoln Navigator. All the wires for the windows were connected at the drivers side switch, and whenever I press the up or down button on the switch, the windows only inch down or up. I have the orange wire from the 530T diode isolated to the ground when armed output, the RED / white wire of the 530T to the RED / white wire of the 790XV and the grey wire of the 530T to the light GREEN/ black wire of the 790XV. Any help would be greatly appreciated.

set toggles on 530 to higher setting for window strenth

Should I set all 4 toggle switches to on?

I tried the toggle switches to all the settings dei recommended, and still no luck. When I use the test light for power on the motor side of the wiring, it only shows positive for a little bit.