viper remote problem

Home / the12volt's Install Bay / Car Security and Convenience / viper remote problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

carsound

Member - Posts: 3

Joined: October 30, 2002

Location: Mexico

Posted: August 13, 2003 at 12:15 PM / IP Logged

probably you need erase all de controls...

its easy

1.- open a door

2.- turn ignition on

3-. press and release de valet and press again and hold

4.-press the transmiter button numeber one...12 times and confirm each time you press tne button with chirp

with this all the remotes are erased....(i do this when my client lost a control)

then program the control normally..2 times each

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.