DEI 555F programming - doesn't work

Home / the12volt's Install Bay / Car Security and Convenience / DEI 555F programming - doesn't work (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

BigMattXXL

Member - Posts: 10

Joined: May 11, 2003

Posted: July 16, 2003 at 2:25 PM / IP Logged

I've got everything hooked up properly, but I can't get the DEI 555F to bypass the PATS system. The remote start works fine if I have a key near the ignition, but I can't get the 555F to properly broadcast the signal. Anybody have any tips for programming this thing? I've been following DEI's directions for that past 2 hours with no results.

Thanks in advance!

XXL

Matt Schear

Back to Top

BigMattXXL

Member - Posts: 10

Joined: May 11, 2003

Posted: July 16, 2003 at 2:26 PM / IP Logged

Sorry - no edit function.

The vehicle is a 1999 Ford Expedition. I have followed the directions - put in key 1, turn to "on", wait until THEFT light goes out, repeat with key 2, place transponder by keyhole, remote start.

No dice - I've tried locating the transponder all over the place, but it just won't work.

XXL

Matt Schear

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 555F programming - doesn't work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.