4 to 8 AWG adapter

I've found 1/0 to 4 AWG adapters, but have not had any luck finding 4 to 8 AWG adapters. Anyone know where I can buy some online? My problem is I want to use 8AWG to wire my HX2's, each in their own chanber. So that leaves me with 2 + and 2 - (that will be apx 4AWG in size when combined) that have to go to my RF 1000bd, which only accepts 1 8AWG input per + and -. I really don't want any more holes then is necessary in my chambers, so is there anything else that I could do or use to keep the 8AWG?Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Stinger makes some, I have some in my car right now...I bought them off ebay, so you may want to just look around on ebay and see if you can find them or find a seller that sells alot of stinger products and see if he can get them for you...

lol sorry, I posted that at about 4 in the morning, and wasnt quite interpreting the question properly...I was speaking of reducers which allow you to use a 4 ga wire where you only have a terminal that accepts an 8 ga allowance...

Sorry you would want (2) of these http://www.darvex.com/miva/merchant.mv?Screen=PROD&Store_Code=D&Product_Code=PBP-51428&Category_Code=APDB they give you 2 outputs instead of four.