Wire Harness Conversion on a Vortec 454

Home / the12volt's Install Bay / General Discussion / Wire Harness Conversion on a Vortec 454 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rreiffer

Member - Posts: 2

Joined: July 22, 2003

Location: United States

Posted: July 22, 2003 at 1:26 PM / IP Logged

Hello,

I have a 98 454 Vortec that I want to put into my 94 Suburban. The Suburban has a 4L80E transmission with dual AC. Has anyone converted the wire harness from a Vortec engine (96 and newer) and put it in a 94 (or older) Chevy truck or Suburban? If so, do you have the diagrams for the wire harness? Any ideas or help on this would be appreciated.

Ricardo

hotrodelectric

Copper - Posts: 112

Joined: March 13, 2002

Location: United States

Posted: July 23, 2003 at 11:26 AM / IP Logged

Ricardo- give me a bit of time to check this out. What you want is possible, I just don't know off the top of my head what you need. The dual A/C shouldn't be a problem- it all runs from the same compressor, and the 4L80E should be the same across the board.If you need some immediate help, you can try Street & Performance (link).

Search for other posts by hotrodelectric

rreiffer

Member - Posts: 2

Joined: July 22, 2003

Location: United States

Posted: July 31, 2003 at 8:06 AM / IP Logged

Hello,

Were you able to dig up anything on the harness? Thanks

Ricardo

johny q

Member - Posts: 4

Joined: July 30, 2003

Location: United States

Posted: July 31, 2003 at 9:11 AM / IP Logged

I am told that http://www.painlesswiring.com can manufacture custom harnesses to fit just such cases as yours. You may want to check them out.

Johnny

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wire Harness Conversion on a Vortec 454

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.