Best way to get +12V?

Home / the12volt's Install Bay / General Discussion / Best way to get +12V? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

unprofessional

Copper - Posts: 61

Joined: July 01, 2003

Posted: August 02, 2003 at 8:04 PM / IP Logged

I'm not planning on keeping the same radio setup forever.

The truck uses 20A fuses for the radio now so I wasn't real sure about it.

Thanks for the help. :)

Back to Top

Search for other posts by unprofessional

krazypolishboy

Member - Posts: 17

Joined: January 25, 2003

Location: United States

Posted: August 16, 2003 at 2:32 AM / IP Logged

dont overkill on the fuse, if you do a fire can start because power will still be flowing because the fuse did not properly "blow". test everything after its all installed and see how much current it is drawing and fuse it accordingly

Back to Top

Search for other posts by krazypolishboy

samdub

Member - Posts: 41

Joined: April 22, 2003

Location: United States

Posted: August 20, 2003 at 10:02 PM / IP Logged

18g wire should be practical for your install

20 amp fuse would be good

definetly go to ignition harness for switched or constant 12v

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Best way to get +12V?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.