the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

500 watts to a S12L7


Post ReplyPost New Topic
< Prev Topic Next Topic >
p1209 
Member - Posts: 32
Member spacespace
Joined: April 12, 2003
Location: United States
Posted: August 01, 2003 at 7:46 PM / IP Logged  

Is 500 watts to a S12L7 not enough juice.  I know you need to give these things the power they need and with a RMS of 750 I was wondering if throwing 500 watts to them was too low!  I have a 1500 watt mono amp and am either looking to do 2 S12's which would be them at their RMS or 3 S12's which would put them around 500 a peice??!! 

Comments???

Thanks

crichols82 
Copper - Posts: 83
Copper spacespace
Joined: June 30, 2003
Location: United States
Posted: August 01, 2003 at 9:04 PM / IP Logged  

i would go with at LEAST 750 a piece....they are very power hungry

mobiletoys2002 
Gold - Posts: 1,050
Gold spacespace
Joined: April 12, 2002
Location: United States
Posted: August 01, 2003 at 9:56 PM / IP Logged  
I would go with the 3 if you can fit them. They are power hungry but they dont need there full rated power to get the big bass going.I have 2 12" L7 and i have 425 watTs a pice going to them and they kick better than most subS i have heard yet. ACTUALLY I HAD TALKED TO A KICKER TECH TODAY AND THEY NEED 500 Watts for optimum performance, he told me and I AGREE BECAUSE I HAVE LESS power AND I DO SOME MAJOR DAMAGE WITH MY 2 SUBS!!
Special-K 
Member - Posts: 43
Member spacespace
Joined: June 02, 2003
Posted: August 01, 2003 at 11:04 PM / IP Logged  
Go for 2 and feed them. What kinda amp is it.
p1209 
Member - Posts: 32
Member spacespace
Joined: April 12, 2003
Location: United States
Posted: August 02, 2003 at 3:51 AM / IP Logged  
I'm using an AUTOTEK XS1600X, which will do around 1500 at 1ohm....(according to Autotek anyway) but I believe that's at 13.8 volts too!
nedgeworth 
Silver - Posts: 264
Silver spacespace
Joined: November 03, 2002
Location: Australia
Posted: August 02, 2003 at 5:24 AM / IP Logged  
I would go with just 2 subs. The more clean power you send to these the better!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer