servo not getting proper ground?
Topic Closed)
Members
Search
Register
Login
Posted: August 02, 2003 at 8:46 PM / IP Logged
SCS/Frigette Vacuum Cruise
2001 Hyundai Accent
-power connections okay
-ground okay
-brake safety stuff okay
-vent/vac ground test moves throttle properly
When driving and turning cruise on, the vent line
does NOT fall to ground (as in the test) but to
about 2V below +Bat, vac does similar but plays
around between 3-5V below, though it maybe cycling
all the way to ground and the multimeter is
grabbing the average. The vent is definatly
static though.
Is this a broken control unit?
We are going on a _long_ road trip in a few
days so this is a real bummer if its not
fixable. 
Brett
Brett
Posted: August 14, 2003 at 12:12 AM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
