Turn light ouput

Home / the12volt's Install Bay / Car Security and Convenience / Turn light ouput (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

royarvind

Member - Posts: 13

Joined: August 06, 2003

Location: New Zealand

Posted: August 06, 2003 at 6:36 AM / IP Logged

Got a new alarm. It has teo wires which says Turn Light (output +). I wanted to connect it to my Parking lights instead of indicators so I used only one brown wire to connect to my parking lights. Is it OK to do that because the alarm is not working. It does not flash light when arming but does flash when disarming. The LED doesnt work and the siren doent work too.

royarvind

Member - Posts: 13

Joined: August 06, 2003

Location: New Zealand

Posted: August 06, 2003 at 6:37 AM / IP Logged

Sorry. It has two wires.......

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 06, 2003 at 8:06 AM / IP Logged

what brand of alarm is it???

what is the car???

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

royarvind

Member - Posts: 13

Joined: August 06, 2003

Location: New Zealand

Posted: August 06, 2003 at 4:09 PM / IP Logged

The alarm is called Carscop. The car is Honda Ascot '93.

Do we need two + outputs for indicator or parking lights?

Thanks

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 07, 2003 at 4:37 AM / IP Logged

did you double check to make sure you have all the wire hooked up. you might have to use both wires for the lights. check the rest of the wires...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

royarvind

Member - Posts: 13

Joined: August 06, 2003

Location: New Zealand

Posted: August 07, 2003 at 7:44 AM / IP Logged

Yeah all the wires are all right but the starter interrupt messed up so i took it out and the alarm itself is working fine. I had connected it following the diagram supplied in the manual.

According to the diagram

the lead frm 86 should go the cut relay (-) output frm the alarm

join 85 and 30 together and connect to Key ON

87A goes to +12v

I somehow feel its not right and would greatly appreciate any help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Turn light ouput

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.