Cylinder Enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Cylinder Enclosure (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

allchromed01r1

Member - Posts: 36

Joined: July 28, 2003

Location: United States

Posted: August 17, 2003 at 8:53 AM / IP Logged

Im making 3 cylinders for 3 10" subs. The diameter is going to be 12 inches and the length is 14 inches. I was hoping somebody could give me a recommendation on how many layers of glass would be adequate for good strength. Thank you

Search for other posts by allchromed01r1

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: August 17, 2003 at 1:48 PM / IP Logged

http://www.shopmaninc.com/ and get some coremat the 2 one and do one layer of that. do about 3 layers of fiber mat then 1 coremat layer then 3 layers of fibermat and u will have an extreamly strong enclosure

dream it, build it, fiberglass it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Cylinder Enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.