Clarion Ungo MS2005

Home / the12volt's Install Bay / Car Security and Convenience / Clarion Ungo MS2005 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

faze

Member - Posts: 2

Joined: August 30, 2003

Posted: August 30, 2003 at 1:11 PM / IP Logged

i have a ms2005 and i got everything wired up except for the door locks (the car is a 96 sentra gxe) i'm putting door pops on the two front doors also and shaving all the door handles off along with the keyholes

any help would be greatly appreciated please

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 31, 2003 at 12:39 PM / IP Logged

If your shaving the door handles, you don't need to lock/unlock the vehicle so use the unlock pulse to activate your driver side solenoid and use an AUX channel for the passenger side solenoid.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

faze

Member - Posts: 2

Joined: August 30, 2003

Posted: August 31, 2003 at 2:56 PM / IP Logged

lol ok figured that out myself today ...i completely removed the smart entrance module from the car and got the drivers door completed(had to install a relay to reverse the polarity and so on....but now i've run into a problem on the passenger side..on the schematic for the alarm the passenger side unlock is - 500mA and i'm not getting any power to it at all unlike the drivers unlock which showed power till the unlock was hit.....i;mn baffled at this part any help would be appreciated thanks

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clarion Ungo MS2005

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.