1988 Acura Legend Keyless Entry Problem.

Ok...I have installed the Black Widow 852 Keyless Entry into my sister's 88 legend. However, the factory alarm goes off everytime the door is opened. I found the factory alarm brain, and there is 5 disarms and one arm, which are all the same color as the unlock and lock wires in the drivers kick panel. So, my question is how do I get the factory alarm to go away, or is there a way to integrate it into this system?? Everything works...ie: doors unlock, lock, lights flash...everything. This remote start does not have the factory arm/disarm wirs, so that is not an option. Anyways, please give me any hints!! I put this work into my sisters car, and it doesn't work!!! Thanks guys!

you can use the outputs from the K/E door locks and tie them into the factory alarm wires. you need to use a diode in-line. ie: the unlock wire from your keyless wire, t-tap off of the wire and go to this wire: OEM Alarm Disarm GREEN/ RED (-) DRIVER KICK PANEL put the diode in-line with the band towards the keyless entry. your keyless entry will turn off the facotry alarm when it gets a neg. pulse from the unlock wire.... Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt