'02 tahoe remote tape deck hole

Home / the12volt's Install Bay / Car Audio / '02 tahoe remote tape deck hole (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sjmenn

Member - Posts: 8

Joined: August 30, 2003

Location: United States

Posted: September 02, 2003 at 10:00 AM / IP Logged

Kind of a weird question. I replaced the factory deck in my '02 tahoe. I also pulled out the remote tape deck (since it won't function without the factory head unit). Does anyone have any suggestions or ideas on what to use to cover the hole left by the tape deck??? I suppose I could leave the tape deck in but in my opinion it would be kind of stupid since it's inoperable (I never even used it when it was hooked up). Don't want to just leave the hole there. Thanks in advance.

Steve

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 02, 2003 at 10:16 AM / IP Logged

Get a piece of ABS platics and cut to the proper size & shape. Use double sided tape to attach to the dash.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

sjmenn

Member - Posts: 8

Joined: August 30, 2003

Location: United States

Posted: September 02, 2003 at 4:28 PM / IP Logged

Thanks for the suggestion, but I was hoping to be a little more creative than that.

BumpinBlazer1

Member - Posts: 2

Joined: August 17, 2003

Location: United States

Posted: September 03, 2003 at 10:24 AM / IP Logged

In my blazer, I cut out a piece of ABS and routered out holes for PS2 controllers. I used extension cables to get from the PS2 under the seat to the dash. I've also seen voltmeters and XM controllers mounted there.

sjmenn

Member - Posts: 8

Joined: August 30, 2003

Location: United States

Posted: September 03, 2003 at 3:59 PM / IP Logged

I actually had my XM controller in there when I still had the factory deck. Now that I have the new Pioneer head unit I don't need the controller, thus I need to do something with the hole.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'02 tahoe remote tape deck hole

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.