Starter Kill Is Not Working Correctly

Home / the12volt's Install Bay / Car Security and Convenience / Starter Kill Is Not Working Correctly (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

back2life

Member - Posts: 3

Joined: September 02, 2003

Location: United States

Posted: September 04, 2003 at 1:28 PM / IP Logged

My stater kill on my alarm is doing the exacty opposite of what it is suppose to do, i was working fine now when you arm it will start when you disarm it wont. I have a Avital Phoneix 2 alarm what could be the problem, I believe it is the relay, but two head are better that one so can someone please help

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: September 04, 2003 at 6:19 PM / IP Logged

you should test the ground-if-arm wire. from there you can decide if the prob come from relay or the unit.

hope this help

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: September 04, 2003 at 7:53 PM / IP Logged

Sounds like you might of used a relay that doesnt have the N.C contact on it,or you hooked the wires to the N.O contact. Double check and make sure that pin 85 goes to 12 volts. Pin 86 goes to ground out when armed. Pin 87a goes to switch side of starter wire,and pin 30 goes to the starter. Hope this helps some. Good luck with it!

Brian

owner/installer

Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: September 05, 2003 at 8:45 AM / IP Logged

I thought he said it "was working" so what made it chage.

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: September 06, 2003 at 1:42 AM / IP Logged

dam, spooky sh*t going on right there buddy Starter Kill Is Not Working Correctly -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Starter Kill Is Not Working Correctly

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.