roll up window module

ih im installing a 4 windows roll up module to my car.  i have two chanels abailable a + and - . tha thing is that i dont know howw to make it work with these channels, because they just sent pulsaiting signals when the alarm is arm, and  they are not strong enoguth to power the module. i f someone has an idia plese helm. thank you.juceforu

Always put the car make/model and alarm, and the modules maker/number please. Sometime this info provides a *snap* in the persons memory. 1) what is the output you are using that is + and - ? Usually they are just (-) and either pulsed, latched, or timed. 2) if you are using 1; 4-window roll up module (au93-4?) then it only needs 1 (-) input to EITHER roll up or roll down the windows. I have this unit myself. 3) if it is an "output" then it will have enough of a signal to trigger the module. It's all transiterized now and requires a very low, low current trigger (pulse) to start itself up. Sounds like you might be using the wrong wires. More info please... ;) Then I'm sure you'll get your answer.

yea i agree w/ floaterr, but if its not the wires then consider a relay.Lathan Hites

"I'm sorry, without a credit card I'll be requiring a stool sample"