best fabric

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / best fabric (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

cmaroman95

Member - Posts: 22

Joined: September 27, 2003

Location: United States

Posted: October 24, 2003 at 6:01 PM / IP Logged

yeah if you can do it then it will make the price go way down. but just make sure that you get a good primer nothing cheap or it want stick as good.

"get in where you fit in"

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: October 27, 2003 at 7:59 PM / IP Logged

how exactly do you wetsand?

dream it, build it, fiberglass it

cmaroman95

Member - Posts: 22

Joined: September 27, 2003

Location: United States

Posted: October 27, 2003 at 9:48 PM / IP Logged

pretty much you do what it says. you buy the wetsand paper you will proply need about 1000 grit and then you either wet the area or dip the paper into water. then you kind of sand. you will see the grit start to build up on the surface and that is good that is what you want just kind of sand in circluar motions and then once done whip off with a rag.

"get in where you fit in"

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: October 28, 2003 at 8:23 PM / IP Logged

sounds good ill post pics when im done

dream it, build it, fiberglass it

Crush

Member - Posts: 8

Joined: October 14, 2003

Location: Illinois, United States

Posted: November 01, 2003 at 2:38 PM / IP Logged

don't go past 400 grit on primer unless your body shop says

wet sanding with extra fine grits is for color and clear coats

which the body shop will do to get the finish smooth

why am i the only one in the world that has that problem?

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: November 02, 2003 at 8:53 AM / IP Logged

Its going to be painted black to match a Toyota 4Runner

dream it, build it, fiberglass it

spike48442

Member - Posts: 2

Joined: November 03, 2003

Location: United States

Posted: November 03, 2003 at 7:57 PM / IP Logged

i just got some of the dvd's from selectproducts ive done alot of little work with glass with my bodykit and my dash the videos clear up a whole lot of questions found in this fiberglass forum there a little pricy try to find a friend to split the cost with but all the products are tried and true time savers and the woven stich cloth u can sometimes get on ebay for cheaper in bulk and it does not frey when you put the resin on it and spread with a brush

N2O dont say it just spray it

pfitz

Copper - Posts: 53

Joined: May 10, 2003

Location: Canada

Posted: December 05, 2003 at 7:55 PM / IP Logged

I have had a lot of luck with Woll blankets, the cheep kind that are found in emergency road kits for your car. Olny problem is that it soaks up resin like you would not believe! and usually requires 2 coats before sanding. The pluss is that you don't have to put much mat on the inside to make it strong.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

best fabric

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.