clutch bypass wire on a 94 integra

Home / the12volt's Install Bay / Car Security and Convenience / clutch bypass wire on a 94 integra (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

quixs1lver

Copper - Posts: 67

Joined: August 19, 2003

Location: United States

Posted: September 09, 2003 at 8:12 PM / IP Logged

i have a 94 integra and i installed a valet 551t remote start on to my car. everything works, that is when you push the clutch pedal down. i have read all the post about bypass the clutch and i found the wires, however there is little next to no room for me to acutally work around these wires. so i was wondering besides the clutch pedal area is there any other place that i could tap into the wires? i found the post about the factory relay behind the sunroof swtich but i didnt quite understand it...so if anyone knows anything about the location of these wires...any help would greatly be appreciated

--quix

Back to Top

Mr.Swifty

Member - Posts: 37

Joined: May 27, 2003

Location: Canada

Posted: September 09, 2003 at 11:03 PM / IP Logged

The Blue with black tracer wire is the one you want....and there is enough room to work, just be patient.....I know it there is enough room, I just did one the other day....and it's a pain....but there is room....so tap into the blue/black wire with your wire that will supply negative before start/during running wire.

Back to Top

quixs1lver

Copper - Posts: 67

Joined: August 19, 2003

Location: United States

Posted: September 10, 2003 at 12:48 PM / IP Logged

so would i have to disconnect the plug from the clutch? or should i just work with it?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clutch bypass wire on a 94 integra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.