2000 chev P/U factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2000 chev P/U factory alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cool_greg

Copper - Posts: 125

Joined: February 20, 2003

Location: New Zealand

Posted: September 19, 2003 at 7:27 AM / IP Logged

heres my problem, i've installed autopage 610's in 2 chev trucks, hooked up the factory alarm disarm wire, and when i use the autopage remote to unlock or remote start it sets off the factory alarm. I've checked that i'm getting the pluse out of the remote starter to disarm the factory alarm and it's there upon unlock and start buttons pressed, any ideas anyone?

Just a Guy, Wiring up those Vehicals

---------------------------------

Gool_Greg

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 19, 2003 at 7:46 AM / IP Logged

What wire did you use for the OEM disarm wire & where did you grab it at ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

cool_greg

Copper - Posts: 125

Joined: February 20, 2003

Location: New Zealand

Posted: September 19, 2003 at 8:20 AM / IP Logged

i used the lt grn at the bcm, I can see the -12v pluse at that wire when i use the factory remote to unlock

Just a Guy, Wiring up those Vehicals

---------------------------------

Gool_Greg

Back to Top

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: September 19, 2003 at 3:04 PM / IP Logged

you have to check the wire by using the key cylinder.

zargon ruler of estranorth

Back to Top

cool_greg

Copper - Posts: 125

Joined: February 20, 2003

Location: New Zealand

Posted: September 20, 2003 at 1:52 AM / IP Logged

can you explain that to me?

Just a Guy, Wiring up those Vehicals

---------------------------------

Gool_Greg

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 chev P/U factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.