Remote Start w/ Starter Kill

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start w/ Starter Kill (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

aLfer

Member - Posts: 3

Joined: July 13, 2002

Location: United States

Posted: July 13, 2002 at 6:24 PM / IP Logged

I have a DEI 553T hornet remote start alarm, and a starter kill relay, Im installing in my 97 accord. My question is, do i wire the relay before or after the remote start wires from the cpu? Also, 86 goes to 12V, 85 to ground when armed, 30 to ignition switch of starter wire, and 87a to motor side of starter wire right? Thanks in advance...

Back to Top

christophe

Member - Posts: 34

Joined: June 09, 2002

Location: United States

Posted: July 13, 2002 at 8:20 PM / IP Logged

you got it, and purple from the dei unit will go to 87a motor side of starter wire.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 14, 2002 at 6:36 AM / IP Logged

The relay configuration you have above.... I don't think that it is right. Hook up a relay like this otherwise if you hook up the relay like you have the starter will stay engaged the second you arm the system. :

86: Switched 12 volts from Ignition #1
87: NOT USED
85: Starter disable wire form alarm ( PURPLE I believe is the color )
30: Motor side of the Starter wire ( BLACK/ WHITE )
87a: Keyside of starter wire ( BLACK/ WHITE )

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

aLfer

Member - Posts: 3

Joined: July 13, 2002

Location: United States

Posted: July 19, 2002 at 7:47 PM / IP Logged

OK, so do I put the starter kill relay on the switch side, or the remote start wire from the alarm closer to the switch? In other words, when I activate the remote start, does the starter kill get disabled if the alarm is still armed?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 19, 2002 at 9:53 PM / IP Logged

If you wire it up like the above diagram, the starter disable will only activate when the system is armed or tripped. When the remote starter is activated , the module temporarily releases the starter disable relay to activate the start sequence of the car. After you arm the vehicle again the relay will be activated again.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start w/ Starter Kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.