Ignition switch

Home / the12volt's Install Bay / General Discussion / Ignition switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ashex

Member - Posts: 4

Joined: September 20, 2003

Location: United States

Posted: September 27, 2003 at 12:41 PM / IP Logged

I'm not entirely positive if this should be here or car radio but the majority of my quesiton should be here.

my radio requires a ACC wire to turn on, which for newer models is conected to the ignition switch, so what I have been doing is adding a wire, going directly from the battery to the radio except it will have a switch in between along with a fuse. I found a wire with a built-in fuse box but there is no fuse, what would be the recommended size for a fuse to put in?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 27, 2003 at 12:47 PM / IP Logged

a 10 amp fuse will be suffiecient for any radio.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ignition switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.