1st and 2nd ignition ?

Home / the12volt's Install Bay / Car Security and Convenience / 1st and 2nd ignition ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: September 27, 2003 at 11:15 PM / IP Logged

I've just install the clifford matrix rs3.5 in my 03 sequoia . I would like to know does it matter if I don't wire the 2nd ignition wire and what is the different ? anyone thank you so much ...

Back to Top

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 27, 2003 at 11:20 PM / IP Logged

Sometimes, if you don't wire all the necessary ign and acc wires, the r\s will not work. Let's put it this way key features may not work like the air conditioning or blower motor. Also, many cars won't start w\o all ign wires connected.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 27, 2003 at 11:27 PM / IP Logged

You HAVE to connect all IGN wires for proper operation of the vehicle after remote start. Common problems that arise are computer error on the dash or transmission computer's not engaging. This could end up costing you $ 1000's in repair bills if the wires are not powered up properly during remote start. As c2deez mentioned, some of the more obvious reasons to power up the 2 nd IGN or ACC wires is for full function of the RS system.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1st and 2nd ignition ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.