Relay isolate door trigger then problems

Home / the12volt's Install Bay / Car Security and Convenience / Relay isolate door trigger then problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

joedcrider

Member - Posts: 11

Joined: September 18, 2003

Location: Mexico

Posted: September 30, 2003 at 8:34 PM / IP Logged

I have a ford escape the alarm went off every 45 min. I read a topic here that says to isolate the door trigger with a relay, and it worked great for one day. and now the screen for the alarm says check door so I disconnected the door trigger wire all the way, and the screen still says check door. Is there some sort of rest for the alarm, or is it fried. It is a alpine 8063.

Back to Top

gotoevolution

Member - Posts: 17

Joined: August 18, 2002

Location: United States

Posted: October 01, 2003 at 7:04 AM / IP Logged

You have to Diode Isolate the door triggers, use diodes, not relayes, that will solve your problem. Where did you get the door triggers from?

Back to Top

joedcrider

Member - Posts: 11

Joined: September 18, 2003

Location: Mexico

Posted: October 01, 2003 at 8:15 AM / IP Logged

There was a post here that said if diode isolate the dose not work you have to use a relay on some fords and the diode did not work it still went off every 45 min. Im using the green and black wire use to activate the dome light.

Back to Top

joedcrider

Member - Posts: 11

Joined: September 18, 2003

Location: Mexico

Posted: October 01, 2003 at 9:41 PM / IP Logged

Ok it works good no problems, the guys on this site KNOW THERE SH!T. New Relay was bad out of the package

Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Relay isolate door trigger then problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.