couple last minute questions b4 install

Home / the12volt's Install Bay / Car Audio / couple last minute questions b4 install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dakoreanjangsta

Member - Posts: 2

Joined: October 13, 2003

Location: United States

Posted: October 13, 2003 at 3:26 AM / IP Logged

im installing an amp and sub into my friends car with a stock head unit. how is the wiring supposed to go for the low output converter or high low converter or wutever its called? do i just splice it into the rear speaker wires?

Back to Top

dakoreanjangsta

Member - Posts: 2

Joined: October 13, 2003

Location: United States

Posted: October 13, 2003 at 3:33 AM / IP Logged

for the remote turn on wire, is there anything bad with hooking it up to like the cigarette lighter wire, or is it better to connect it to the ignition wire?

thanks for ur help, and sorry for posting twice

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: October 13, 2003 at 4:08 AM / IP Logged

the loc should just splice into the rear channels. the remote wire can be spliced into any 12v+ that you have in the car except for some you may need to add in a toggle switch of a switch of some kind

Quad L Handyman services

Back to Top

intensem1rider

Member - Posts: 25

Joined: November 23, 2002

Location: Canada

Posted: October 13, 2003 at 12:14 PM / IP Logged

connect the remote wire into a 12 v ignition source, but you may need to get a device that stops the pop when you turn it on, like the one stinger sells.

http://www.darvex.com/miva/merchant.mv?Screen=PROD&Store_Code=D&Product_Code=SPSOFF&Category_Code=EC

Back to Top

Search for other posts by intensem1rider

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

couple last minute questions b4 install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.