What size fuse for remote lead

Home / the12volt's Install Bay / Car Audio / What size fuse for remote lead (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: October 14, 2003 at 10:02 AM / IP Logged

I am running a configuration of multiple amps and a sub crossover. I purchased a 4 fuse block from AutoZone and am using a relay to power the remote turn-on leads. What size fuse would be efficient and safe for these leads. Just want to protect what I have in the car. Thanks in advance for any help reguarding this topic. I cannot say enough good things about the site.

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: October 14, 2003 at 10:33 AM / IP Logged

A remote wire is very low current. If all your running off of the relay is the remote leads then you can use a 1 or 2 amp fuse.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

What size fuse for remote lead

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.