ps2 Enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / ps2 Enclosure (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lil_mikey

Member - Posts: 31

Joined: April 28, 2003

Location: Canada

Posted: October 16, 2003 at 5:24 PM / IP Logged

Alright so me and my buddy wanna make a enclosure so that we can put our ps2 in it as well as take it out when were not at shows..

Wood or fiberglass or a sheet metal box be cool? Any designs or ideas would be useful..

1 is going into a 2002 neon lx and the other in a 2000 sunfire.

Thanks alot!

acornstu

Member - Posts: 5

Joined: October 17, 2003

Location: United States

Posted: October 17, 2003 at 8:55 AM / IP Logged

lil_mikey wrote:

Alright so me and my buddy wanna make a enclosure so that we can put our ps2 in it as well as take it out when were not at shows..

Wood or fiberglass or a sheet metal box be cool? Any designs or ideas would be useful..

1 is going into a 2002 neon lx and the other in a 2000 sunfire.

Thanks alot!

just make an angled box under the dash that it slides into with a couple of bolts or finger nuts that way all you have to do is unplug it and stuff the wires uner the dash then just unbolt the bracket, that is what i plan to do annyway and i don't see any problem with it if you hide the bolt hole undet the dash

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: November 11, 2003 at 6:15 PM / IP Logged

Make a new center council and make an enclosure there, at least thats what I'm doing. (out of fiberglass) Just remeber not to install your PS2 horizontally, it scratches your laser eye and all your discs get little knicks every time you turn it off. Listen closley when you do turn it off if it happens to be on its side you'll hear a slight little "tic tic tic" noise thats the disc slowing down by knicking your laser lense. Just some FYI I thought you'd like to know if you allready didn't. I've worked on small electronics for 5yrs and PS2s always happen to be the same thing, the laser eye went bad

go custom or go home!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ps2 Enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.