Cooling Amps

Home / the12volt's Install Bay / Car Audio / Cooling Amps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

DjIQ

Copper - Posts: 107

Joined: March 10, 2003

Location: United States

Posted: October 28, 2003 at 4:22 PM / IP Logged

Whats up everybody, Im going to run an autotek XS900.4 and a XS1500.1..... the 1500.1 will be pushing (3) MB Quart Reference Series Subs and the XS900.4 will be pushing a 2 pairs of Refrence components, 5.25's in the front and 6.50's in the rear, i have a small car, 1986 Honda Prelude 2.0si I want to install these amps in the back seat, where if you fold the seat down, there will be a cutout and the amps will be inside it behind plexiglass, with neon, how many fans do you guys think i need to run, or would i be okay without them?

Back to Top

HumbleI

Copper - Posts: 103

Joined: January 29, 2003

Location: United States

Posted: October 28, 2003 at 5:00 PM / IP Logged

I would run two .... one taking air in and one pushing air out.... I dont know too much about coooling fans, but thats what I would do, Id make sure that there is enough space between your amps and the seat material/plexiglass so that if you do install the fans they can move air throughout the compartment.

Back to Top

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: October 28, 2003 at 9:28 PM / IP Logged

Make sure the CFM is the same on the fans. they all in the same air space?

I need quality equipment, feel free to donate.

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: October 28, 2003 at 10:13 PM / IP Logged

http://www.selectproducts.com/shopsite_sc/store/html/page98.html If you use a type 80 fan (the way I would go) you will only need one in and one out (although you could get away with just 1 in and a vent out). If you go with the other box type fan, then I would suggest 2 in and 2 out. The box fans can be found for about $ 5.00 at any computer repair shop. Also be sure that the fans can breath, and that you do not obstruct the air flow. In the past when I have built amp racks into seats, I have built a concealed intake and outtake grill into the seat for the fans.

Back to Top

DjIQ

Copper - Posts: 107

Joined: March 10, 2003

Location: United States

Posted: October 29, 2003 at 5:38 AM / IP Logged

Thanks for the responses guys

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: October 29, 2003 at 10:21 AM / IP Logged

Your welcome

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Cooling Amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.