Running wires

Home / the12volt's Install Bay / Car Audio / Running wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Greg S

Member - Posts: 31

Joined: September 30, 2003

Location: United States

Posted: November 05, 2003 at 7:48 AM / IP Logged

Pretty much and making sure the latch lines up properly.

Greg Stoddard

Back to Top

dcgc

Copper - Posts: 78

Joined: August 04, 2003

Location: United States

Posted: November 05, 2003 at 12:16 PM / IP Logged

I would remove the kick panels and the door panels have your window up and simply remove the boot from the door and the jamb fish the wires thru the jamb far enough where you can straighten the boot physically and use stiffer wire to fish the speaker wire thru. then wire thru the door making sure you have enough speaker wire to play with better to have too much. once this is done good luck on replacing the boot. sorry cant help you there, but vaseline works wonders

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Running wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.